Home page » products » Refractometers » Automatic Digital Refractometer: Abbemat
Refractive index (RI) measurements with the Abbemat automatic digital refactometer are fast and non-destructive. In refractometry, only a small volume of sample is required. For routine applications choose from different flow-through cells to suit your analysis and get RI and RI-derived results in seconds, e.g. the sugar content of a sample
Features

 

Attractive optical design
- High resolution of 0.000001 nD
- Measuring range from 1.32 to 1.56 nD (HP model) and in a wide range from 1.30 to 1.72 nD (WR model)
- The HP model is used for routine applications and also frequently as a sugar refractometer (ICUMSA)  
- The WR model allows RI measurements of organic solvents, perfumes and aromas
Save space and money with internal temperature control
- Very fast adjustment of sample temperature
- No external thermocirculator required
- Internal Peltier thermostat adjusts the temperature accurate to ±0.03 °C
- Temperature control from 10 to 70 °C, optionally up to 110 °C (HPHT and WRHT model)
- Stability of the temperature adjustment is ±0.002 °C
Intuitive operation
- Easy operation combined with best performance by using a PC as an intelligent terminal
- Large number of pre-programmed scales
- Easy calibration
- GLP-conform data recording
- User management
- Wide range of measuring modes
Specification

Brix Scale (ICUMSA 1974)168
ABBEMAT® HP
ABBEMAT® WR
Range
1.32 - 1.56 nD
1.30 - 1.72 nD
Resolution
1 x 10-6 nD
1 x 10-6 nD
Accuracy
2 x 10-5 nD
4 x 10-5 nD
Brix Scale (ICUMSA 1974)168
Range
0 - 100 %
0 - 100 %
Resolution
0.001 %
0.001 %
Accuracy
0.015 %
0.030 %
Automatic Temperature
Compensation
selectable
selectable
 
 
 
Other RI Derived Scales
more than 20, continuously extending
User Defineable Scales
linear, polynomial, formula (integrated formula parser)
Calibration
One or two point calibration
Materials in Contact with Samples
Prism
YAG (Yttrium Aluminium Garnet)
Sample mold
Stainless steel
Seal
Kalrez™
 
 
Sample Cover
Hinged flap with latch and exchangeable sample presser for attaching a flow cell
Measuring Principle
Critical angle of total reflection measured by shadowline detection with 2048-element linear CCD array and digital data processing
Methods
Complies with ICUMSA, ASTM, SSDT, ISI, AOAC, OIML, JIS, DIN, CID methods
Light Source
High performance LED lamp, average life time >100,000 h
Wavelength
589.3 ±0.1 nm (sodium D) by wavelength-adjusted interference filter
Sample/Prism Temperature
Control
Built-in solid state thermostat (Peltier), range 10 - 70 °C (ambient temperature 10 - 40 °C), optional 10 - 110 °C, accuracy ±0.03 °C, stability ±0.002 °C
Speed of Thermostating
Approx. 20 seconds for cooling water from room temperature
down to 20.00 °C
Temperature Control of Internal
Refractometer Components
Peltier solid state thermostat keeps all internal refractometer components
at a constant temperature
Mechanical Data
 
Case Dimensions
W x H x D
Weight
Measuring Unit
Stainless steel
180 x 120 x 250 mm
appr. 6 kg
Power Supply/Interface Unit
Anodized aluminum
135 x 80 x 220 mm
 
appr. 2 kg
 
 
 
 
Interfaces
RS-232C serial port for bidirectional communication with a PC
Operator Console
Personal Computer (PC) required
Software
Set-up and operation in English, German, Russian, Spanish, Portugese, French, Polish, Dutch, other languages upon request
Power Requirements
100 - 240 VAC +10 %/-15 %, 50/60 Hz, min. 10 W, max. 100 W, depending on sample temperature setting and ambient temperature

Print