Home page » products » Rigaku  »  X-ray fluorescence (XRF) spectrometers » X-ray fluorescence (XRF) spectrometers NEX CG
Rigaku NEX CG delivers rapid qualitative and quantitative determination of major and minor atomic elements in a wide variety of sample types — with minimal standards.
Features

Polarized Cartesian geometry for trace level sensitivity

Unlike conventional EDXRF analyzers, the NEX CG was engineered with a unique close-coupled Cartesian Geometry (CG) optical kernel that dramatically increases signal-to-noise. By using secondary target excitation, instead of convention direct excitation, sensitivity is further improved. The resulting dramatic reduction in background noise, and simultaneous increase in element peaks, result in a spectrometer capable of routine trace element analysis even in difficult sample types.

Novel software reduces the need for standards

NEX CG is powered by a new qualitative and quantitative analytical software, RPF-SQX, that features Rigaku Profile Fitting (RPF) technology. The software allows semi-quantitative analysis of almost all sample types without standards — and rigorous quantitative analysis with standards.

Features

  • Analyze 11Na to 92U non-destructively
  • Solids, liquids, powders and thin films
  • Polarized excitation for lower detection limits
  • Novel treatment of peak overlap reduces errors
  • PPB detection limits for aqueous samples using UltraCarry
  • Simplified user interface with EZ Analysis

 

Specification

Excitation

  • X-ray tube with Pd anode
  • 50W max power
  • 50kV max voltage
  • Four standard polarization and secondary targets depending
    on application, for optimum excitation
  • Optional fifth target for optimal excitation of Na and Mg

Detector

  • High performance SDD
  • Peltier electronic cooling
  • Large active detection area
  • Optimum balance of spectral resolution and high
    count rate

Sample Chamber

  • Large 38 cm diameter x 10 cm deep sample chamber for bulk
    samples
  • 15-position automatic sample changer (32mm sample cups)
  • 10-position automatic sample changer (35-40mm sample cups
    and pellets)
  • 9-position automatic sample changer with sample spinner
  • Analysis in air, helium purge, or vacuum

Environmental Conditions

  • Ambient temperature 18-28ºC (65-82ºF)
  • Relative humidity ≤75%
  • Vibration: undetectable by people
  • Free from corrosive gas, dust and particles

Computer

  • External PC computer system
  • Microsoft® Windows Vista® operating system
  • Keyboard and mouse
  • Monitor
  • Printer

Software & Application Packages

  • Menu-based software for control of spectrometer functions and data analysis
  • Application templates
  • Simple flow bar wizard to create your own methods
  • RPF-SQX FP for qualitative and quantitative analysis
  • Matching Library for augmentation of FP
  • Automatic spectral overlap deconvolution
  • Empirical calibration with overlap and matrix compensation

Spectrometer Data

  • Single phase AC 100/220V, 15/7A (50/60 Hz)
  • Dimensions: 60(W) X 60(D) X 40(H) cm (23.6 X 23.6 X 15.7 inch)
  • Weight: 80 kg (176 lbs)

Options

  • Fifth secondary target for optimum excitation of Na and Mg
  • 9-position automatic sample changer with sample spinner
  • Vacuum system
  • Uninterruptible power supply (UPS)
  • 10-position automatic sample changer

Print