50-C9030 Compression device to test portions of 40x40x160 mm mortar prisms broken in flexure.

STANDARD EN 196-1, EN ISO 679, ASTM C349

Weight approx.: 8 kg

50-C9032 Compression device to test 50 mm (2”) mortar cubes

STANDARD ASTM C109

Weight approx.: 8 kg

Flexuraltest onmortar prisms40x40x160 mm

65-L0019/B EN Flexure testing device for 40x40x160 mm mortar specimens

STANDARD EN 196-1, EN ISO 679

This jig is fitted with an upper bearer that moves vertically supported by springs. One of the two lower bearers can tilt horizontally and the distance between the two bearers is 100 mm as prescribed by the EN standards.

Weight approx.: 8 kg

65-L0019/C ASTM Flexure testing device for 40x40x160 mm mortar specimens

STANDARD ASTM C348

Identical to the model 65-L0019/B except for the distance between the two lower bearers which is 119 mm.

Weight approx.: 8 kg

Distance pieces

65-L1000/20 Distance piece 165 mm dia. x 20 mm high

65-L1000/30 Distance piece 165 mm dia. x 30 mm high

65-L1000/40 Distance piece 165 mm dia. x 40 mm high