Home page » products » Labconco  »  Water Purification System » WaterPro RO Stations
WaterPro RO Stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water. RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. They may be connected to glassware washers such as Labconco's SteamScrubber, FlaskScrubber and FlaskScrubber Vantage Series Washers to provide purified rinse water. WaterPro RO Stations may also be used to produce laboratory grade feedwater for ultimate purification by a polishing system such as the WaterPro PS Polishing Station. Water may be dispensed manually from a valve or optional dispensing gun. Water from the valve may also be activated automatically by using the exclusive timed dispense feature that allows for unattended operation.
Features

·       Purification Technologies:

Prefilter:

The prefilter removes particulates larger than five microns from the feedwater protecting the reverse osmosis membrane.

Carbon Filter:

An activated carbon filter removes organics and chlorine from the feedwater. Provides protection for the reverse osmosis membrane.

Reverse Osmosis (RO) Membrane:

A thin film composite membrane removes up to 99% of inorganics, organics and colloids.

·       Timed dispense from 1 to 99.9 minutes for unattended operation

·       The WaterPro RO supplies purewater at a typical rate of 1 liter per minute.

·       Integral 17 liter polyethylene storage tank

·       Attractive and durable Type 304 stainless steel front panel; epoxy-coated steel cabinet

·       Temperature compensated conductivity LED monitor displays water quality in microsiemens from 1 to 999.

·       Automatic flush valve extends RO membrane life by automatically flushing the RO membrane and tank for 3 minutes after each 12 hour period of inactivity.

·       Internal pressure gauge monitors and displays RO-purified water pressure from 0 to 160 psi.

Specification

·       Setting dispensing time: 1 to 99.9 minutes

·       Purewater at a typical rate of: 1 liter per minute

·       Storage tank: 17 liter

·       LED display show actual water quality: from 1 to 999 microsiemens

·       Internal pressure gauge monitors from 0 to 160 psi.

·       Electrical requirements: 220V, 50/60Hz

Feedwater requirements:

+ Max inlet pressure: 100 psi

+ Min inlet pressure: 30 psi

+ Flow rate: 5.5 liter/ min

+ Temperature: 10-350C

+ pH: 4-10

+ SDI max: 5 SDI

+ Turbidity: ≤ NTU

+ Langelier Saturation Index: Negative

+ Max Ion Concentrations:

Iron (total): ≤ 0.1ppm

Manganese: ≤ 0.1ppm

Chlorine: ≤ 0.5ppm

Print