-          When combined with Anton Paar’s PFD filling device, sample is taken directly from the package into the measuring chamber of OxyQC - with no loss of dissolved oxygen during sample transfer. OxyQC for the laboratory provides reliable O₂ results, even out of very small packages.

-          Integrated rechargeable battery provides up to 10 hours at-line operation

-          O₂ results after only 50 seconds

-          Intuitive user interface with clearly arranged navigation of the menu

-          Clear sample identification for full traceability of 500 measurement results

Built-in support for the most precise result

-          Data Logger function: enables continuous O₂ measurements from the line or tank. It provides a battery life of up to ten hours

-          System Check: guides the operator through recommended periodical O2 sensor check

-          The TPO (Total Package Oxygen = O₂ in the liquid phase + O₂ in the head space) value can be calculated via Anton Paar’s free software AP-SoftPrint

-          Auto-valves: Automatically opens and closes inlet/outlet valves by only one Start or Rinsing press

-          Rinsing Time: Use the rinsing time setting to adjust the transported sample volume for measuring, it is set between 10 and 300 seconds. After that time, inlet/outlet valves will be closed automatically, no need any press of operator

-          Sample IDs: You can assign a sample ID to each sample. This function helps to uniquely assign measured data to samples (sample identification) and the measuring point where the sample was taken, etc. You can save up to 19 different sample IDs for full traceability of your results. Sample IDs can have up to 10 characters.

-          Methods: The instrument is equipped with a predefined standard methods and 9 additional custom methods.

Fast and wireless:

-          Bluetooth interface for wireless printing

-          USB interface for data transfer to a PC

-          RFID interface for changing measurement settings quickly by reading RFID tags

-          Measuring range of O₂: 0 ppm to 4 ppm

-          Measuring units: mg/L, ppm, ppb, % sat., μg/L

-          Measuring range of Temperature: -3 °C to +30°C (27°F to 86°F), Accuracy: ±0.2 °C

-          Repeatabilitys.d. of O₂: ±2 ppb

-          Resolution of O₂: 0.1 ppb < 100 ppb

-          Sample volume: approx. 100 mL

-          Measuring time per sample: approx. 50 seconds

-          Internal storage: 500 measured results

-          Interfaces: 1 x RS-232 for PC and printer; 1 x USB for PC; 1 x RFID, 1 x Bluetooth (optional)

-          Protection class: IP67

-          Power supply: AC: 100 - 240 V, 50/60 Hz,1.5 A; DC: 12 V, 3.0 A

-          Rechargeable battery type: Li-Ion 11.1 V, 2.25 Ah(optional: Li-Ion 11.25 V, 2.6 Ah)

-          Maximum at-line operation: 10 hours

-    Weight: 1.7 kg