DIGIMAX, Semi-Automatic EN testers for cubes, cylinders and blocks
Dual user interface display and PC - Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale - Compatible with the new, intuitive and smart DATA MANAGER Software - Very easy to use, complete with many functions, totally flexible, open to network comunications - Double stage hydraulic pump with rapid approach and precise oil flow control. Allowing high throughput of accurate tests (up to 40 tests per hour) - Optional control of a second frame - Optional internal graphic printer including Load-Time plot...
  1. Features
  2. Specification



EN 12390-4

MAIN FEATURES

  • Dual user interface display and PC
  • Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. On request from 1% with special calibration procedure. See upgrading options.
  • Compatible with the new, intuitive and smart DATA MANAGER Software. Very easy to use, complete with many functions, totally flexible, open to network comunications
  • Double stage hydraulic pump with rapid approach and precise oil flow control. Allowing high throughput of accurate tests (up to 40 per hour)
  • Optional control of a second frame. Active frame selection via manual lever.
  • Optional internal graphic printer including Load-Time plot
  • Connect to laboratory network via LAN port/software
  • Allow remote verification of settings and performances. For easy debugging of unexpected malfunctions
  • Recording facility of up to 10 test profiles for each channel allowing quick and easy test start


GENERAL DESCRIPTION

Introduction
The new Digimax Compact-Line compression testers are ideal for commercial laboratories and production control to test cubes, cylinders and blocks.  They can be fitted with accessories to perform other tests. See accessories.
The Digimax Compact-Line testers feature:

Frame
Four column high stiffness welded frame tested for stability to EN 12390-4.
Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.

Compression platens
Series 50-C46xxx and 50-C56xxx are fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 160x320 mm and cubes up to 200 mm.
Surface hardness is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request. See Upgrading options.
Series 50-C47xxx and 50-C57xxx are fitted with rectangular platens 310x510 mm that are suitable for testing cylinders up to dia. 160x320 mm, cubes up to 200 mm and blocks.
Surface hardness 55.5 HRC (600 HV) , flatness tolerance 0.05 mm. Traceable certificate of surface hardness available on request. See Upgrading options.

Hydraulic power unit
Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low volume for loading. Fitted with special pressure-compensated proportional valvefor the manual preset of load rate requiring just occasional operator's intervention.

Digimax redout unit
Hardware
132,000 points effective resolution, three channels, touch screen graphic display 240x128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive, test data downloadable to PC, Ethernet port, real time management software (optional, see accessories 82-SW/DM DATAMANAGER)
Firmware
Simultaneous display of load-specific load, actual load rate and load/time graph; LAN connection to PC; advanced memory management; multi coefficient calibration.
Recording facility of up to 10 test profiles for each channel including type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, standard in use and other general informa¬tion. Each one of the recorded test profile can be recalled automatically to save time

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front door and rear transparent fragment guard.

ORDERING INFORMATION

For Cubes and Cylinders to EN 12390-4

2000 kN cap.
50-C46B02 DIGIMAX, semi-automatic Compact-Line compression tester, 2000 kN cap. for cubes up to 200 mm and cylinders up to dia. 160x320 mm. 230 V, 50 Hz, 1 ph
50-C46B03 Same as above but 220 V, 60 Hz, 1 ph
50-C46B04 Same as above but 110 V, 60 Hz, 1 ph

3000 kN cap.
50-C56B02 DIGIMAX, semi-automatic Compact-Line compression tester, 3000 kN cap. for cubes up to 200 mm and cylinders up to dia. 160x320 mm. 230 V, 50 Hz, 1 ph
50-C56B03 Same as above but 220 V, 60 Hz, 1 ph
50-C56B04 Same as above but 110 V, 60 Hz, 1 ph

For Cubes, Cylinders and Blocks to EN 12390-4 and EN 772-1

2000 kN cap.
50-C47B02 DIGIMAX, semi-automatic Compact-Line compression tester, 2000 kN cap. for blocks, cubes up to 200 mm and cylinders up to dia. 160x320 mm. 230 V, 50 Hz, 1 ph
50-C47B03 Same as above but 220 V, 60 Hz, 1 ph
50-C47B04 Same as above but 110 V, 60 Hz, 1 ph

3000 kN cap.
50-C57B02 DIGIMAX, semi-automatic Compact-Line compression tester, 3000 kN cap. for blocks, cubes up to 300 mm and cylinders up to dia. 160x320 mm. 230 V, 50-60 Hz, 1 ph
50-C57B03 Same as above but 220 V, 60 Hz, 1 ph
50-C57B04 Same as above but 110 V, 60 Hz, 1 ph

ACCESSORIES

Splitting tensile test devices
Compression devices for cement and mortars
Distance pieces to adjust the vertical daylight
Flexural test device for concrete beams
Data manager PC software
Frame pedestals

UPGRADING

Second frame facility
50-C10B/2F
Upgrading the machine for a second frame connection and control. Frame selection via manual lever

Graphic printer (To be factory installed)
50-C10/PR
Upgrading the DIGIMAX, PILOT and AUTOMAX to incorporate a serial graphic printer in the front panel allowing also load/time plot at the end of test.
Specifications:
- Very silent printing
- High speed: 50 mm/sec
- High resolution: 203 dpi=8 dots/mm
- Support test and graphic printing
- Easier maintenance with self-diagnostic
- Paper width: 57.5 mm

Fragment guard lock device.
50-C50/L
Useful in case of  explosive failure to avoid opening of the door. Suitable for C46B0x, C56B0x,C47B0x, C57B0x models

For Cubes and Cylinders to EN 12390-4

Models 50-

 

C46B02
C46B03
C46B04

 

 

C56B02
C56B03
C56B04

 

Capacity, kN

2000

3000

Platens dim. mm

Dia. 300

Dia. 300

Ram travel mm

50

50

Max. vertical daylight mm*

350

350

Horizontal daylight mm

350

370

For specimen size:
Cubes cm
Cylinders cm (dia.xh)


10, 15, 20
10x20, 15x30, 16x32


10, 15, 20
10x20, 15x30, 16x32

Overall dim. (lxdxh) mm

920x440x1030

1010x495x1100

Weight approx. kg

630

1021

 

 
*To be adjusted using the suitable distance pieces. See accessories
 
For Cubes, Cylinders and Blocks to EN 12390-4 and EN 772-11

Models 50-

 

C47B02
C47B03
C47B04

 

 

C57B02
C57B03
C57B04

 

Capacity, kN

2000

3000

Platens dim. mm

310x510 mm

310x510 mm

Ram travel mm

50

50

Max. vertical daylight mm*

350

405

Horizontal daylight mm

350

370

For specimen size:
Cubes cm
Cylinders cm (dia.xh)
Blocks


10, 15, 20
10x20, 15x30, 16x32
Within platen dim.


10, 15, 20
10x20, 15x30, 16x32
Within platen dim.

Overall dim. (lxdxh) mm

920x600x1030

1010x625x1100

Weight approx. kg



*To be adjusted using the suitable distance pieces. See accessories
1Other models specifically designed for block testing conforming to EN 772-1 are available on request.